P.O. Box 104 • 333 Salem Ave • Fredericktown,
OH 43019
PHONE: 740 - 694 -9926 E-mail: info@countrymanufacturing.com
FAX: 740 - 694 - 5088 For directions to our Business Click Here
Toll Free: 1-800-335-1880
Office Hours Monday-Friday 7:00 am - 5:00 pm EST.
FREE SHIPPING to the
nearest freight terminal or commercial business address in the
Continental U.S. 48 States. Free Residential delivery available
on most orders under 200 lbs. * No Minimum Order Requirement
for items on this Page. Click here
for your FREE CATALOG!
Swing Out Feeder
and Water Units
 Imagine being
able to Hay, Grain, and Water your horse without having to enter
the stall, saving valuable time and eliminating the inconvenience.
Our swing out combination feeder and utility door units can upgrade
your stall system appearance and versatility at minimal cost
and effort.
Swing Out Utility Door
Save tons of time and labor with our uniquely designed swing
out utility door. Made of heavy duty 1/8" steel plate mounted
on a sturdy angle iron frame. Measures 22" H x 20"
W. Designed to accommodate a wide variety of feeders, buckets,
bucket holders, or our Thermo Bucket. Heavy duty latch is designed
so that the door cannot be opened from the inside. Can be installed
to swing out from the left or right by simply inverting the frame.
Shipping wt 30 lbs. View Installation
Instructions
 |
Steel Swing Out Utility Door.
Model CM 122
(Door shown with mounted Thermo Bucket not included) Paint
color black.
$99.00 Click
here to Order On-line
This item can ship to your residence
FREE!
|
Swing Out Combination Feeder
The feeder is pivoted on a sturdy angle iron frame that is
symmetrically designed so it can be used on either the left or
right hand side of the stall by simply inverting the frame. The
feeder is constructed of heavy duty 16 gauge hot rolled steel
with a removable polyethylene feed pan and 1/4" rod trimming
on all exposed edges to eliminate sharp edges. The internal hay
rack is welded 7/16" hot rolled steel rod. Measures 37"
H x 22" W.
Shipping wt. 62 lbs. View Installation
Instructions
 |
Steel Swing Out Combination Feeder
Model CM 121
(Paint color black)
$170.00 Click
here to Order On-line
This item can ship to your residence
FREE!
|
Galvanized and Aluminum Swing
Out Units
Galvanized units are made of corrosion resistant galvanized
steel, with a removable polyethylene feed pan. Dimensions are
the same as steel units. Aluminum provides all of the benefits
of above steel units plus, the benefits of maintenance and corrosion
free aluminum.
Hay Racks
 |
Wall Model Hay Rack Model CM 212.
• Top opening is 2 feet wide x 1 foot deep. Unit is 2
feet high.
• Open space between bars for safety.
• Four corner mounting for rigidity.
• All steel welded construction using 7/16" hot rolled
steel. (color black)
$45.00 Click
here to Order On-line
This item can ship to your residence
FREE!
|
 |
Combination Feeder Model CM 2125.
One feeder for both jobs -hay and grain
• For the corral or stall.
• Hang onto your fence or trailer,
or mount on your stall wall.
• 2 ft. wide x 1 ft. deep x 2 1/2 ft.
high. Holds a bunch of hay and
5 gallons of grain.
• No wasted hay! Falls into tray.
• Rugged 16 gauge steel
with heavy steel hay bars.
• Removable hangers are made to
withstand the punishment of horses.
$105.00 Click
here to Order On-line
This item can ship to your residence
FREE!
|
 |
Corner Model Hay Rack Model CM
213
Maximize stall Space with this heavy duty Hay Rack
• Rugged welded construction
• All steel welded construction
using 7/16" hot rolled steel.
• Big 30 inch opening at top,
tapered to 16 inches at bottom. (color black)
$45.00 Click
here to Order On-line
This item can ship to your residence
FREE!
|
High Strength -
No Corrosion Lifetime Feeders
Rugged Cast Aluminum
Cast Aluminum Feeders
Extremely heavy duty cast aluminum provides the toughest structure,
yet is light in weight. You get both the advantages of plastic
(corrosion prevention) and steel (high strength) with cast aluminum.
With horses and other live stock, RUGGED CONSTRUCTION is a must.
Both feeders have spherical shaped bottoms which causes the feed
to flow to a single low point allowing easy clean up by the animal.
If you have grown tired of constantly replacing the rubber and
plastic feeders, here is the one-time solution!
 |
CM 34 Corner Feeder
• Holds up to 3 gallons
• Four point mounting
• Each mounting surface is 16 in. long with a depth of 6
in.
• Weight approximately 11 lbs.
$95.00 Click
here to Order On-line
This item can ship to your residence
FREE!
|
 |
CM 33 Flat Wall Feeder
• Holds up to 3 gallons
• Three point mounting for stability
• 20 in. wide at rear x 6 in. deep x 12 in. front to back.
• Weight approximately 13 lbs.
$95.00 Click
here to Order On-line
This item can ship to your residence
FREE!
|
Mineral Block Holders
Both Mineral Holders have the same basic heavy duty design to
accept either one, or two, standard blocks of salt or mineral.
Two mounting holes are located to provide rigid mounting and
protect against either upward or downward force that may occur.
The double block holder dimensions are approximately 10 in. x
7 in. x 3 in. and the single holder 5 in. x 7 in. x 3 in.
 |
Single Block Mineral Holder CM 35
• Weight approximately 3 lbs.
$28.00 Click
here to Order On-line
This item can ship to your residence
FREE!
|
 |
Double Block Mineral Holder CM 36
• Weight approximately 5 lbs.
$35.00 Click
here to Order On-line
This item can ship to your residence
FREE!
|
.
.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
|
